mixing chamber
英 [ˈmɪksɪŋ ˈtʃeɪmbə(r)]
美 [ˈmɪksɪŋ ˈtʃeɪmbər]
混合室；预燃室；搅拌间
双语例句
- Experimental study of Improvement of Air-Gas Mixing Chamber in Premixed Blasting Chinese Cooking Appliance
鼓风预混式中餐灶空气-燃气混合室改造实验研究 - During the feeding, attention must be paid not be mix metal or any other hard object in the mixing chamber to avoid damaging the machine parts.
加料时千万注意，不得把金属或其他坚硬物品投入混炼室内，以免损伤机件。 - The mixing structure is composed of the mixing chamber, front and rear rotor shafts and transverse sealed device, which are fixed to the engine seat by two support seats.
混练机构由混炼室，前、后转子轴及端面密封装置等构成，通过两个支撑座固定于机座上。 - Under the loaded working state, the top peg will descend into the mixing chamber, and have the material plasticated or mixed under rated pressure.
在负载工作状态下，上顶栓降到混炼室内，使物料在额定压力下塑炼或混炼。 - In-line dynamic assembly includes the mixing chamber or pipe section.
管道动力混合器装配包括混合室或管道部分。 - High strength in medium temperature, stable volume in high temperature, wear-proof, anti-slag corrosion, material returner, coal-saver furnace wall and mixing chamber inner wall etc.
中温强度高，高温体积稳定，耐磨损，抗熔渣侵蚀。返料器、省煤器炉墙、混合室内墙等部位。 - Has simulated the process of elevating temperature during rubber in the mixing chamber.
模拟了胶料在密炼机室中的升温过程。 - The device comprises an alkali feeding pipe, an acid feeding pipe, a mixing chamber, a rotation mixing chamber, and a nozzle.
该装置包括有进碱、酸管，混合室，旋混室和喷嘴。 - Materials stuck or detained inside the mixing chamber or around the top peg should be cleaned.
清除混炼室内部和上顶栓四周粘结、滞留的物料。 - It is shown that because of the shock in the mixing chamber the ejector capacity will not increase as continuously decreases the discharging pressure.
结果表明：持续降低出口压力会在混合室内形成激波，喷射因数保持不变； - Based on the existing technology, a second-level steam annular nozzle is added and forms an annular nozzle together with a first-level mixing chamber, that is, a O-shaped nozzle and an annular nozzle;
采用多级复式结构，在现有技术的基础上增加一个二级蒸汽环形喷嘴，与一级混合室一起构成环形喷嘴，即一个O形喷嘴和一个环形喷嘴； - The surface materials of the mixing chamber and rotors should be chosen rationally to change material surface energy and increase friction on them.
通过合理选择密炼室和转子表面材料以改变材料表面能来增大胶料与它们之间的摩擦力； - The mechanism of a new air flotation equipment with an air water mixing chamber is explained.
阐述了气水混合室式气浮装置的工作机理。 - The combustion efficiency of hybrid rocket motor is very low. In order to increase combustion efficiency, we can use vaporization chamber and mixing chamber.
混合发动机燃烧效率比较低，使用预燃室和补燃室、合理设计喷注器以及采用扰流装置，可以提高燃烧效率； - This paper presents a method to determine diameter of mixing chamber in the ejector of a vapor compression/ ejection hybrid refrigeration system ( VCEHRS), and discusses its performances that vary with the working condition.
对压缩/喷射混合制冷循环的喷射器混合室直径的确定方法进行了探讨，并对不同制冷工况下喷射器的工作特性进行了理论探讨。 - The flow field of the ejector shows the effects of the section of the mixing chamber on the performance of the ejector.
喷射器内流场直观地显示了混合室截面大小对喷射器性能的影响过程。 - Design of Mixing Chamber of Headbox
流浆箱混合室的设计探讨 - Experimental study on pressure characteristic in the mixing chamber of gas-liquid two-phase internal-mixing oil nozzle
气液两相内混式油喷嘴混合室内压力特性的实验研究 - In flux calculation on internal-mixing nozzle, the pressure in the mixing chamber was often regarded as the production of atomizing medium pressure and critical compression ratio of this atomizing medium, but it has large error to the experimental result.
在内混式介质雾化喷嘴的设计计算中，有些文献[1]近似将混合室内压力与雾化介质进口压力之比看作为临界压比，这种近似与实验结果有较大差别。 - Based on experimental results, a three-dimension two-phase flow physical model of the mixing chamber in Y-jet is set up. A mathematical model related to the physical model is also established.
本文提出了Y型介质雾化烧嘴混合段三元两相流动的物理模型，并建立了与之对应的数学模型。 - Introduced mixing chamber, the rotor and the up and down stream equipment development.
介绍了混炼室、转子及上下辅机的发展概况。 - Technological Reformation of Fuel Oil Supply System for Asphalt Mixing Chamber
沥青拌和楼燃油供油系统技术改造 - The experimental study on the mixing chamber of pulse detonation engine prototype is performed.
对脉冲爆震发动机的混合室进行了实验研究。 - Using constrictive air and transformer oil as working substances an experimental study is made on pressure characteristic in the mixing chamber of gas-liquid two phase internal-mixing-oil-nozzle in the paper.
以压缩空气和变压器油为工质，对气液两相内混式油喷嘴混合室内压力特性进行了实验研究。 - Test Study of Pins type of mixing chamber mixer
销钉式混炼室密炼机的试验研究 - Furthermore, a numerical simulation was accomplished to discuss the two-phase flow mechanisms and the flow characteristics of the two-phase flow in the mixing chamber.
并且对混合室内的气液两相流进行了模拟计算，对该气液两相流的流动机理和流动特性进行了讨论。 - The exit area of the nozzle and the throat structure of mixing chamber have great impact on eject coefficient.
喷嘴出口面积和混合腔喉部结构对喷射器的喷射系数影响较大。 - The effects of channel height, mixing chamber length and space between the jet holes on the anti-icing system performance were studied.
对比了射流孔间距、通道截面高度和混合段长度等参数对导流隔板防冰性能的影响。 - For the closed cycle of diesel engine, the mixing chamber, control strategies and algorithms of oxygen supply are designed, and a closed cycle running was carried out without load. 2.
针对柴油机闭式循环，完成了混合箱设计、供氧控制方案与算法的设计，进行了空载闭式循环试运行实验。 - By calculation, the main dimensions of the two phase ejector such as the throat sectional area of the primary flow nozzle and mixing chamber have been defined.
并且通过计算得到了主蒸汽喷嘴和混合室喉部截面积等主要尺寸。